Parametric Travel Router & Phone Enclosure / 5G Router (GL.iNet Beryl, Slate, TP-Link & More)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric 5G travel router & phone case. Ventilated, modular, and built for 24/7 permanent setups.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Parametric Travel Router & Phone Enclosure for a 5G router setup
Supports: GL.iNet Beryl, Slate, Puli, Mango, TP-Link TL-WR902AC, TL-WR1512X & More
Overview
I had a travel router and an old 5G phone lying around in a drawer and wanted to set up a permanent, reliable 5G network gateway. Instead of leaving them scattered, I designed this clean enclosure to keep everything neatly organized, well-ventilated on the shelf. It's fully parametric, so i can be fully customised for your setup in OpenSCAD.
Compatible Hardware & Use Cases
Routers: Most travel routers in the formfactors like GL.iNet Beryl (GL-MT3000), Slate (GL-AXT1800), Puli, Mango, and TP-Link models (such as TL-WR902AC, TL-WR1512X).
Phones: Designed to be customizable for most mobile phones, plus dedicated internal clearance for routing internal cables.
Fully Parametric: Easily modify the OpenSCAD variables at the top of the script if you need to adjust dimensions for your specific hardware.
Key Features
Honeycomb ventilation patterns on the front grid, bottom floor, and top lid prevent thermal throttling during 24/7 continuous operation.
Built-in internal channels and a dedicated side cable cover keep power and ethernet lines tidy and strain-free.
Consists of 4 discrete printable parts for easy printing without supports:
1. case_main.stl (Main housing body)
2. phone_insert.stl (Phone insert tray)
3. cable_cover.stl (Pin-mounted side cable cover)
4. top_lid.stl (Top lid with lip)
No screws, nuts, or metal hinges needed—everything is friction-fit (adjust tolerances for your printer accordingly) or pin-aligned.
Recommended Print Settings
To ensure structural durability and clean aesthetics for a permanent setup, use the following profile:
Material: PETG strongly recommended (better heat resistance and flexibility than PLA).
Layer Height: 0.2 mm.
Perimeters: 3 walls
Infill: 15% – 20%
Supports: None required if oriented flat on the build plate.
(If your specific router model requires slightly different clearance, feel free to tweak the variables right at the top of the included OpenSCAD script!)