Wall-Mountable Nitrile Glove Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nitrile glove box that can be mounted on a wall. Can also be used to hold wet-wipes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This two piece glove box can be mounted on the wall to accomodate boxes of varying widths, heights and depths. It consists of two pieces that can be mounted independently with double sided tape or #6 screws depending on your needs.
Can be used for:
Nitrile Gloves
Wet Wipes
Other dispenser boxes of similar size
Interior Dimensions:
Width: Variable depending on placement of components. I have mine at 240 mm
Height: 130 mm
Depth: 80 mm
Recommended print settings:
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Ironing: Top Most Surface
Wall: 4
Support: Normal, Snug (if available)
Brim: Not required, but recommended. Brim Outside Only, 5 mm
Filament Types: PLA, PETG, ASA, ABS. PLA or PETG work well.
Mounting Items Required:
#6 × 1½" (3.5 × 40 mm) wood screw) Flat Head Wood Screw, Phillips Drive
Acrylic or Very High Bond (VBH) foam tape
I recommend screws with wall anchors for sheetrock mounting or just screws for mounting on wood or other surfaces.
If you will be attaching this to a surface that cannot have holes in it, use one of the two type of tape show above. Make sure both surfaces, the box and the mounting surface are cleaned with 95% or higher concentraion of ispropyl alcohol and allowed to dry thorougly before mounding. Make sure to completly cover the back surface of each half with flat, evenly applied strips of tape and apply to mounting surface holding firmly for 30-40 seconds for best results.