Heat Set Insert Press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 3D printable stand to easily place your heat set inserts so that they go in perfectly straight and with ease.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 0
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
About
A simple easy to print press for your heat set Insert needs. Place your soldering iron of choice into the adaptable hole in the arm and ensure your threaded inserts go in straight every time!
Hardware:
1 Extra long rubber band (to keep the arm up)
(Optional) 2 M5x40 screws for tower
1 M5x10 screw to hold the soldering iron in place
Quantities:
1 of each part except for the following:
2 M5 Pegs (only if NOT using 2 M5x40 screws for tower)
2 Berings
Assembly:
First slide the Solder Arm onto the tower then slide column aligner onto the bottom of the tower and place the tower into the base
Use your M5 Pegs/screws to secure the tower into place. Slide/screw them in from the back.
Place the storage cover on top of the recessed slot on the base.
DONE!