Boosted Board Remote Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I basically wanted a wall mount for my Boosted Board remote where the charging cable would automatically slide into…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 1
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I basically wanted a wall mount for my Boosted Board remote where the charging cable would automatically slide into the remote. Additionally the leash just slides through a channel to the bottom. The charging cable can be zip tied to the bottom part of the mount.
Update:
I was not really happy with the original design of the charging cable mount. Therefore I slightly redesigned the zip tie attachment to a single plane to the back of the cable. With two zip ties tensioned really tough with two tongs, the cable sits in place pretty well now. Also I adjusted the model so that I could print it without any support and made it a bit stiffer overall.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
Yes
Supports:
No
Notes:
~~I printed the mount with the charging port at the bottom. By doing this I avoid having support material inside of the model which would probably be pretty complicated to be removed later on.~~
I printed the mount with the opening for the remote towards the build plate. The model should be rotated correctly already. The model came out great without any supports but I used a raft because my white filament does not stick really well to my glass bed.
Category: Organization