Bilge water pump mesh
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part is a replacement for original mesh bottom of Bilge pump. It's mount plate and holds pump
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
There are some bilge pumps with a fragile protective mesh mounted on bottom which also serves a function of mounting plate (pump is mounted to boat's bilge - the lowest inner part of a ship or boat's hull where water collects). The locking parts might break and whole part can become unusable.
This part is a replacement for original mesh part. As this part serves a function of mounting plate and should hold whole pump on it while in same time be unlockable by bending a brackets - part must be printed using rigid and little flaxible filament - PETG is recommented. PLA will work as well.
Consider checking diameter and size of brackets!
Here are examples of pumps this part might fit:
- Whale Orca 2000 Submersible Bilge Pump - https://www.asap-supplies.com/products/whale-orca-2000-submersible-bilge-pump-24v-126-lpm-28-5mm-hose-w-be2004
- Pompa zęzowa VETUS 2000 - https://vetus-sklep.pl/en/v-quipment/3319-bblge-pump-24v-8717372393150.html?srsltid=AfmBOorMEVAoN5qaRy3K0gxKBiSKQHxN0GDcbbLbKyx1MhnAt0f17zx2
The exact maker and model of pump this part was originall created unfortunatelly is fogotten so please check the critical dimentions for compatibility.
Print file details:
Filament: PLA
Nozzle: 0.4
Infill 5%
Modifiers infill 30% for holding clips
Supports for critical parts of clips
