Counting matching models…
Playtime with MARV Like many of you, I have a lot of Marvins lurking around. My son also likes to play with the little ones. So why not connect one to the other. MARV offers 5 small Marvins place to go on discovery tour. This time I left…
Farben 1 Blau/blue 2 Weiß/white 3 Silber grau /grey 4 rot/red, orange/orange, braun/brown (je nach modell) 5 schwarz/black
Other holders didn't clamp tight enough or broke easily. This one is “springy” so clamps nicely. Won't rust bottom of can.
Better Model Yacht Launcher Design allows the launcher to lie flat for one plane for travel. Then for usage you will rotate the lower curved bottom curves tubes into position to cradle the model yacht for launching and retrieval.…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
architectural model yacht and boat
This is a project of a yacht with features of a typical Dutch "Bakdekker". I am now busy printing the hull and fittings. A STEP file of the entire boat is available. !!! Everything is still in design phase and can still change !!! the…
A benchmark that has dozens of overhangs, bridges, fine details and more! Prints FAST & No Supports Required!!! NO SUPPORTS! Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Hi! Original model is from Grabcad "Azmi AK" 's https://grabcad.com/library/r-boat-pirate-1 I faired the hull, reduced some details and wrapped it in order to 3d print it... *Project is not finished yet. I'm going to add mast & boom soon.…
This is my print ready version of Bill Hagerup's Green Hornet footy class RC sailing yacht. This is still a work in progress and I'll upadte once my make hits the water! For commercial licence feel free to contact me!
Infill Sails - Sailing Yacht! You always wanted to own one? well this is your dream come true! As a decor for your home or just as a gift! You can use it to Display your Infill Types for your Projects if you'd like! Modifiers? What am i…
Due to hail or other mechanical impact plastic parts of Windex Wind Indicators easily get destroyed or damaged. In order to avoid a full 1:1 replacement attached you will find various spare parts. Further in case you wish to produce a…
Magnet from: silnemagnety.cz aliexpres
Set sail with Yatchy , a sleek, modern mini yacht perfect for showing off your 3D printer's capabilities! This smooth, stylized design is a fun alternative to traditional benchy test prints. With clean lines, rounded features, and a…
Highly detailed 3D printable yacht model with realistic proportions and step-by-step build guide. Designed for builders who enjoy complex and rewarding projects, the M/Y Mirabel is a highly detailed luxury yacht model with realistic…
This is Epstein's Yacht from the series “The Expanse”. It was created by Chris Kuhn and posted by owlstraw on Sketchfab as a 1pc model . The Expanse is one of my all-time-favorite series and love the many different spaceships and unique…
Hello ! Today I would like to show you my latest project "Black Pike" Black Pike is RC Sailing yacht - my own project. During design, I've made two protypes. First one - you can download here Second (final) version is shown on video…
This is designed to take a small model Yacht to display it and carry out repairs. It is part of a larger project which you can read about on my I nstructables feed . I am printing it out in PETG because of the water factor. I have…
I might add apendages and a rig later on.
LEGO DIVING YACHT Print and play
Inspired by the worlds first 3D Benchy and the worlds first 3D printed super yacht, the 88m Pegasus yacht by Jozeph Forakis ( link ), I give you the 3D Benchy Super Yacht. Included in this mashup are printing measure and calibrate items.…
NOTE - a 1:30 scale model of this vessel can be found HERE Please NOTE , building a full sized boat from a model is NOT allowed for a certified Class Globe 580 This model is NOT in strict conformity with the original 580 Plans and is…
The H-type Nubian yacht, also known as the Naboo yacht, was a small yacht used by the Naboo.
Little Yacht I made in Fusion 360, inspired by the Sundowner.
Print in material of your choice. I used PLA and printed with 100% infill at .3mm layer height.
Transport box box for MiniMax sailing yacht, transmitter (Radiomaster Pocket), three rigs, battery, charger... Integrated boat stand lid_templates_1-3 are used to cut the clear plastic inserts for the inner lid box and lid printed with…
NOTE - a 1:10 scale model of this vessel can be found HERE Please NOTE , building a full sized boat from a model is NOT allowed for a certified Class Globe 580 This model is NOT in strict conformity with the original 580 Plans and is…
Drill two holes in the back of your board and attach. It is really that simple 80% infill for the plate and screws gyroid infill pattern no supports
Summary Change History 03/19/2026: Updated bottom pattern 12/27/2025: Added open-bottom variant 12/07/2025: Improved model aesthetics What’s Included: One dice keeper Printable rules Printable scorecards Printable pattern used for the…
Wooden sail yacht . Print the hull with 100pc infill and it'll float well enough :)
Ship or Yacht water tank key Tight fit!
Yacht Instrument Covers. With custom logo. To replace lost covers. Originally PLA which on a mooring is lasting 2 years plus. Petg is more suitable
This is training for Cleat Hitch for those who want to learn. You can put this between your leg fingers and learn this
Yacht anchor for a scale model of a 54 Carver.
Sail yacht, printed in four parts. You will need a little glue and something for the mast!
Another smaller yacht. Hull is hollow. Print with 100% infil so the bottom has some solid weight to it. Print the deck as you usually would, no need for it to be solid.
Fun model! you will need some glue, some dowels ( even balsa squares work), a plastic bag and a screw or small rod, and some string. You may need to split this file into objects in your slicer!! For printing, it is best to pause before…
A big yacht that includes 2 pieces to 3d print. Recommended to 3d print in 2 pieces.
🛥 Add a touch of realism and elegance to your creations with this Luxury Yacht Jet Tender , a detailed 3D printable model designed to complement any modern yacht or diorama scene. ⚓ This tender is a static display model, perfect for…
it will work with very light infill and some keel weight. fun model. insert sail into cylinder, insert cylinder into hull deck. big sail goes forward! will work with additional keel weight, an I mean quite a bit of keel weight, so please…
LLAVERO PATRON DE YATE PY KEY RING Yacht Skipper Category: Keychains
After walking my lovely dog through the local park and having a coffee opposite what was our local boat pond when I was a young lad where I used to sail my “Birkenhead Star Pond Yacht”, I began scrolling through Pond Yachts in Google.…
Torque Block / Race Tail for Landyachtz Small Blind. Follows the shape of the board. Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid Infill 0.1/0.1 Fuzzy Skin Use adhesive double-sided tape (3M VHB)…
The base of the Optimist yacht model for Lucky13. It is best to print with supports and then remove excess material. Optimist model: https://www.printables.com/model/764606-printable-optimist-template Podstawa modelu jachtu Optymist dla…
Summary This is an electrical distribution box for a boat or leisure yacht for up to seven DC circuits. The box provides a negative and a positive bus bar. The bus bars are positioned on top of each other such that the negative and…
This is a model of a spaceship for the role-playing game Traveller, ideally Mongoose 2nd edition. The original design of the ship is at https://travellerrpgblog.blogspot.com/2016/08/deck-plans-starship-200-ton-ish-yacht.html , and was…
Для печати средней части "купола" лучше предусмотреть поддержки. Материал любой, слой 0.28, 3 периметра, 3 слоя сверху и снизу. Заполнение Grid 20%
Supporto magnetico da battagliola diametro 30mm.
For my yacht I want to have lamp in the forepeak sail storage. Having some white led strips lying around and led driver in my drawer I designed simple "spray proof" lamp. Strips are "gel version" soldered together. All connections and PCB…
The Motor Yacht S.printer is my first model boat design and I decided to take on a challenge to create a detailed model yacht. It was also my first multi-color print so please forgive the bits of color bleeding on my print as I am dialing…
*A functional, marine-inspired handle designed for 3D printing. Model is pre-supported and optimized for FDM printing with strong materials like PETG or ASA.*
FIXED propeller support for http://www.thingiverse.com/thing:1706357 Remix of https://www.thingiverse.com/thing:1707606 as it wouldnt slice in Cura (missing surfaces) Category: 3D Printing
Cyber Thug Yachting Pixel Sunglasses 🕶 Bold cyberpunk pixel-art sunglasses with the iconic phrase "CYBER THUG YACHTING" ! This edgy 3D printable model features: - Asymmetric pixelated lens design (one round lens + geometric pixel blocks)…
Hello, Sharing my model of miniature boat styled on Yamarin 88DC. Dimensions: 163x48x48mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
The Benchy has sailed through countless races, conquering both calm and stormy seas, and setting world records along the way. Now, it's time to give it the recognition it deserves—on the Wall of Fame in yacht club model rooms around the…
I wanted to make a cleat model to train friends in knots before yachting experience . Best to tryout with ropes up to 6mm . You can use them as hangers at home - there is a spacer model to drill holes for 3+ cleats in one line. All…
A big yacht that includes 2 pieces to 3d print. Recommended to 3d print in 2 pieces.
🛥 Add a touch of realism and elegance to your creations with this Luxury Yacht Jet Tender , a detailed 3D printable model designed to complement any modern yacht or diorama scene. ⚓ This tender is a static display model, perfect for…
Better Model Yacht Launcher Design allows the launcher to lie flat for one plane for travel. Then for usage you will rotate the lower curved bottom curves tubes into position to cradle the model yacht for launching and retrieval.…
This is a model of a spaceship for the role-playing game Traveller, ideally Mongoose 2nd edition. The original design of the ship is at https://travellerrpgblog.blogspot.com/2016/08/deck-plans-starship-200-ton-ish-yacht.html , and was…
Summary Change History 03/19/2026: Updated bottom pattern 12/27/2025: Added open-bottom variant 12/07/2025: Improved model aesthetics What’s Included: One dice keeper Printable rules Printable scorecards Printable pattern used for the…
Used for easy-pull sails on mast on Libre micro racer and other landyachts. See more on crazyeti.com
I dont play Yahtzee often because I HATE having to buy the paper... so I'm experimenting with a Stamp for either letter paper, note books or recycled cardboard like pizza boxes. I have to find a good filament last time i tried doing…
I designed these catches to replace the ones originally fitted to many Moody yachts. The catches are fitted to the sliding "glass" doors of the galley and heads cabinets. No supplier of the OEM catches has been found so I created this…
Monochromatic wall art of 2005-2009 Princess Yachts V53. Align the two files in slicer of your choice. Not designed to be printed separately.
