1 / 4
Miele AutoDos Refill Adapter & Plug Set — image 1
1 / 4

Miele AutoDos Refill Adapter & Plug Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This set allows you to sustainably and easily refill your Miele AutoDos container with your own dishwasher powder

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Miele AutoDos Refill Adapter & Plug Set

The set consists of three parts:

  • Mount: For precise guiding and stabilization.

  • Plug: For secure re-sealing after refilling.

  • Opening Aid (Tool): For easy unlatching and handling.

Required Materials & Tools:

  • 10 mm drill bit

  • Superglue (for a permanent, leak-proof fixation of the mount)

  • PETG (strongly recommended!)

Important Material Note (PETG)

Dishwasher use requires high temperature resistance (up to 60–70 °C / 140–158 °F) as well as resistance to chemical detergents. Standard PLA will warp quickly at high dishwasher temperatures and leak. Be sure to print all parts in PETG (or ABS/ASA).

Position the mount precisely at the designated spot on the AutoDos container. Create a clean pilot hole using the 10 mm drill bit. Apply superglue sparingly to the contact surface of the mount and press it firmly and aligned onto the container. Let the glue cure completely. Fill in your desired detergent, insert the plug using the opening aid, and lock it with a short twist.

Disclaimer

The reproduction and use of this adapter is entirely at your own risk. No liability is assumed for any damage to the dishwasher, the AutoDos system, the container, or damage caused by leaking detergent. Always ensure correct assembly and a tight seal prior to use.

Tags