1 / 4
MADOS 100mm Diagonal Corner Brace - MADOS-20DN - Modular Building Block — image 1
1 / 4

MADOS 100mm Diagonal Corner Brace - MADOS-20DN - Modular Building Block

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

MADOS 100x100x20mm modular block - uses MADOS Diagonal Joints. Joint strength 0 (weakest) to 9 (strongest). MADOS-20DN

Rating
0 / 5
Likes
3
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

See more information on this Part at mados-20dn

0.2mm Recommended layer height

For best results, use Classic perimeter generator and one wall/perimeter on top and bottom layers.

Print the recommended STL file first. If the joint is too hard, go to a lower strength number setting, and if it's too weak, go to a higher setting.

This part uses Diagonal Joints. Use the lines on the joints to show which direction to attach them. Position in the corner of the joint and push the part to slide it in until it clicks into place.

The best Joint Strength can change depending on your Filament, the Part Design, and your personal preferences. 

Search and filter through all parts at mados3d.com

MADOS is a building block system that uses a special kind of Joint that can be printed on any side of an object without needing support structures, making it more versatile than traditional Snap Fit joints, or dovetails.

MADOS always has a consistent internal (female) joint, but has many different kinds of external (male) joints to choose from. You can use Snap Fit, Twist, and Diagonal sliding joints all on the same internal joints. View the About page for more information mados3d.com/about

This building block system is completely open source and public domain under Creative Commons Zero, so you can use it without needing to give credit (although it’s always appreciated). View a simple breakdown of how licences work with this system at mados3d.com/licences

Tags