Savage Hogue Overmold ARCA Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a thin spacer to adapt a short ARCA plate to the front of a Savage rifle with a Hogue Overmold stock.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a thin spacer to adapt a short ARCA plate to the front of a Savage rifle with a Hogue Overmold stock.
The front crew uses the stock's sling stud mounting point, and a new hole is drilled for the rear screw. A wing nut is epoxied into the stock to capture the wing nut. All stainless steel hardware is recommended. The set screw or button head screw can be used to plug the rear mounting point if the plate is removed for hunting.
If installing the plate rearward with 2 new holes, then get 2x wing nuts and washers.
Follow my YouTube video for instillation, as it would be the same with most plastic stocks.
BOM:
2x #10-32x1" SS Counter Sink Bolts
1x #10-32 SS Wing Nut
1x #10 SS Flat Washer
2+oz epoxy
Optional:
1x #10-32x1" SS Set Screw
or
1x #10-32x1" Button Head Screw
Amazon Affiliate Link for inexpensive ARCA rail:
https://link.amazon/B0idYwg2c
You can just epoxy the chamber with the wing nut if you don't want to epoxy the entire forend channel.