HaRVy - End Gaskets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accessory Gaskets for end of HaRVy
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 4
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
These are 4mm gaskets for the ends of HaRVy. Use these to attach accessories such as the HaRVy Double Fan Attachment. Print in TPU. You can alternatively use caulking instead of these gaskets.
The Draw-Gasket version is meant to deal with the case where the middle of the layers in HaRVy have bowed outwards. If you are attaching an accessory with draw plates, squeeze the middle of HaRVy after assembly. If there is any give, then use the draw version. The fingers grip the edge and pull the middle tight to prevent leaks. When printing the draw-gasket, print the finger assembly in PETG and the rest in TPU (this requires multi-material printer).
If using drawplates, 3.5mm drawplates work well to give compression for a tight seal. Otherwise, the holes are sufficiently large for both #6 and m4 bolts.