Inventum WS135 Scale Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Curved screw-on bracket that holds an Inventum WS135 scale upright on the inside of a cabinet door.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this because it's an easy way to put your scale away. Mine is an Inventum WS135 (type KS38), and I have used the bracket on the inside of a cabinet door for years.
The bracket is a flat 144 x 49 mm plate, about 2 mm thick, with a curved rim along one edge (7 mm high in total). It takes two screws, through 3 mm holes 122 mm apart.
The Onshape document is public.
Print settings
Print it flat with the rim up. The STL is already in that orientation.
The two ends of the rim stick out about 4 mm past the plate edge, starting about 5 mm up. I think I printed it with supports under those ends (it was a while ago). The 3MF has tree supports from the build plate.
PLA, 0.2 mm layers. About 40 minutes and 15 g with the supports.
The 3MF is a Bambu Studio project for a P1S with a textured PEI plate (Arachne walls).