1 / 12
Invisible Longboard Wall Hanger - No Drilling, Adhesive Hook Mount (Dropdeck/kicktail Friendly) — image 1
1 / 12

Invisible Longboard Wall Hanger - No Drilling, Adhesive Hook Mount (Dropdeck/kicktail Friendly)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A slim J-hanger that hides a cheap clear adhesive hook inside it, so your board floats on the wall with no screws.

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
24
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial — Share Alike

Make your board float on the wall with no drilling and no visible hardware.

I couldn't find any good designs for hanging my longboards horizontally without nails and ease of picking up the board when you want to use it.

These hangers clip onto cheap clear adhesive hooks and hide them completely. Once your board is up, all you see is the board. As a college student moving dorms, it's perfect for when I don't want to put holes in the wall. I put it on a metal wall to not rip off paint.

I used 2 of these super strong hooks: https://www.amazon.com/dp/B0B2F55P76

The heel is optional but I found it helped to keep the board stable in case you touch it.

Features

  • Invisible: the hook tucks inside the hanger and the board covers the rest.

  • No tools, no holes: stick, slide, hang. It comes off clean when you move.

  • Rock solid: the hanger locks onto the hook, and a wide foot braces against the wall, so it won’t lift, twist or tip when you grab your board.

  • Light and quick to print: 15–19 g per hanger, no supports.

  • Physics optimized : stress-tested in many simulations with MuJoCo, topology optimization, FEA.

Two versions

  • Drop-deck: for boards with risers or kicktails, like the Pantheon Pranayama.

  • Standard: for flatter drop-throughs, like the Pantheon Nexus.

STEPs attached, modify as needed.

Print 2 hangers + 2 heel shoes (optional) per board. There’s also a tiny hook fit test and deck gauge to check fit first.

Setup: stick two clear 2.48" (63 mm) adhesive hooks level, 340 mm apart for the drop-deck version or 400 mm for the standard one. Slide the hangers on, adjust if needed, set your board in, grip side to the wall.

To print: PLA, as supplied, no supports, 0.2 mm layers, 3 walls, 25% gyroid. Do whatever you feel here, they are strong and probably won't break.

Tags