Dial Indicator Mount for Lowrider Kinematic Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: Lowrider-Kinematic-Dial-Indicator_0.6n_0.3mm_PLA_MK3S_49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount a dial indicator on your v1e lowrider 3 or 4.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Mount a dial indicator on your V1 Engineering LowRider CNC 3 or 4 using design8studio's kinematic mount.
You'll need:
Dial Indicator
1/4" or M6 nut (1/4" is a tighter fit)
1/4" or M6 bolt - 1" or 25mm minimum.
I'm using a $15 Wen with .001" increments, but there are lots of other options. You might consider the Neotek digital indicators for more precisely reading tiny variations.
It has 3 mounting holes for the dial indicator, allowing for -15, -7.5, 0, +7.5 and +15mm height offsets.
I printed it in PETG, no supports.
In general there are 2 sources of variation: variation in the lowrider core position as it travels across the gantry, slightly bending down and bending forward in the middle where the gantry is weakest, and variation in the surface being measured.
You can verify that your gantry has very little variation by moving the core along the gantry, measuring a known very flat object.