Paraffin Gun/Wash Gun repair nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New nozzle for paraffin gun, m11 x 1mm thread
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
I use these generic guns for waxoil etc, and I lost the original tip for mine. They tend to keep coming off! M11 x 1mm, weird size.
This tip works perfectly and provides more adjustment than the standard one. The locknut is probably not required.
I have provided two versions, one with a built in support wedge to print on an angle and one without.
Its fairly easy to break the tip off due to print orientation! The angled version helps a little perhaps. In reality it is easy to print off a spare. They last a good while anyway unless you drop it or something.
You should be able to print both versions without slicer support, I used PLA, seems ok so far even with warmed waxoil etc. I must have put at least 10 litres through by now.