Paraffin Gun/Wash Gun repair nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New nozzle for paraffin gun, m11 x 1mm thread
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I use these generic guns for waxoil etc, and I lost the original tip for mine. They tend to keep coming off! M11 x 1mm, weird size.
This tip works perfectly and provides more adjustment than the standard one. The locknut is probably not required.
I have provided two versions, one with a built in support wedge to print on an angle and one without.
Its fairly easy to break the tip off due to print orientation! The angled version helps a little perhaps. In reality it is easy to print off a spare. They last a good while anyway unless you drop it or something.
You should be able to print both versions without slicer support, I used PLA, seems ok so far even with warmed waxoil etc. I must have put at least 10 litres through by now.