Snap-Fit Dirt Bike / Motocicleta de Cross
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bring the adrenaline of motocross to your 3D printer! This is an assembly-ready dirt/enduro bike model. The chassis and
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 40
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Recommended Material: PLA (for sharp details and vibrant colors) or PETG (for stronger, more flexible snap-fit joints).
Layer Height: 0.2 mm or 0.16 mm for smoother curves on the bodywork.
Infill: 15% - 20% (Gyroid or Grid).
Supports: None! The pieces are oriented to be print-in-place/flat without support structures, provided your printer has decent bridging.
Perimeters / Walls: At least 3 perimeters to make sure the axle clips are strong and flexible enough to snap onto the wheels without snapping off.
