Snap-Fit Dirt Bike / Motocicleta de Cross
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring the adrenaline of motocross to your 3D printer! This is an assembly-ready dirt/enduro bike model. The chassis and
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Recommended Material: PLA (for sharp details and vibrant colors) or PETG (for stronger, more flexible snap-fit joints).
Layer Height: 0.2 mm or 0.16 mm for smoother curves on the bodywork.
Infill: 15% - 20% (Gyroid or Grid).
Supports: None! The pieces are oriented to be print-in-place/flat without support structures, provided your printer has decent bridging.
Perimeters / Walls: At least 3 perimeters to make sure the axle clips are strong and flexible enough to snap onto the wheels without snapping off.
