1 / 2
30mm Rheinmetall APFSDS ammunition used in the PUMA IFV — image 1
1 / 2

30mm Rheinmetall APFSDS ammunition used in the PUMA IFV

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

30mm Rheinmetall APFSDS ammunition used in the PUMA IFV

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial

30mm Rheinmetall APFSDS – Ammo Model for PUMA IFV

This is a scaled replica of the 30×173 mm APFSDS-T armor‑piercing fin‑stabilized discarding sabot round used with the Rheinmetall MK44 gun on the PUMA infantry fighting vehicle. The model comprises 4 parts: the casing, tip, sabot (base), and projectile. The tallest component measures 175 mm, making it compatible with most 3D printers, including the A1 mini and Prusa Mini.

The projectile features a tube at the tip—you can trim it to create a sharp nose, since most printers can’t produce such a fine point with a standard 0.4 mm nozzle. Both the tip and sabot include 5 slots for 2×6 mm magnets, which you can use for added weight or to hold the parts together.

PLA is the recommended material, though PETG also works well. For a more realistic look, consider a matte finish on the sabot. The fit tolerance is 0.1–0.15 mm; if the parts are too tight, sand the inner diameter rather than the outer one to keep the surface clean.

Original design by Dreamer78

Tags