30mm Rheinmetall APFSDS ammunition used in the PUMA IFV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
30mm Rheinmetall APFSDS ammunition used in the PUMA IFV
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
30mm Rheinmetall APFSDS – Ammo Model for PUMA IFV
This is a scaled replica of the 30×173 mm APFSDS-T armor‑piercing fin‑stabilized discarding sabot round used with the Rheinmetall MK44 gun on the PUMA infantry fighting vehicle. The model comprises 4 parts: the casing, tip, sabot (base), and projectile. The tallest component measures 175 mm, making it compatible with most 3D printers, including the A1 mini and Prusa Mini.
The projectile features a tube at the tip—you can trim it to create a sharp nose, since most printers can’t produce such a fine point with a standard 0.4 mm nozzle. Both the tip and sabot include 5 slots for 2×6 mm magnets, which you can use for added weight or to hold the parts together.
PLA is the recommended material, though PETG also works well. For a more realistic look, consider a matte finish on the sabot. The fit tolerance is 0.1–0.15 mm; if the parts are too tight, sand the inner diameter rather than the outer one to keep the surface clean.
Original design by Dreamer78
