1 / 2
Guition 10.1" ESP32P4 / wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame to mount a JC8012P4A1C display to the wall
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This remix allows it to mount the 10.1" JC8012P4A1C display more sturdy to the wall than in the original design. The plate can either be screwed to the wall or fixed with adhesive tape.
The frame can optionally be fixed in place with a M3 screw, otherwise it will only be held in place by gravity.
Tip: To stop the frame from rocking you can add small pieces of foam to the back of the frame as seen on the picture.
Required Hardware:
6x M2.5x8 counter sunk screws
Optional Hardware:
1x M3 heat set insert
1x M3x12 counter sunk screw