Wristwatch BMG Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small form factor stand-alone extruder using BMG gears and Orbiter 2 Mounting hole locations.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 1
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Instructions
Print the three necessary parts: Backplate, Main Body and Tension Arm. Two Main Body files are available, one supports the use of an ECAS fitting to secure a reverse bowden. The standard Main Body just has a recess for the reverse bowden.
Install two heat set inserts and assemble.
Print using Voron recommended settings with ABS or ASA - 0.2mm layer height with a 0.4mm nozzle
BOM
2 M3 Heatset Inserts per Voron Spec
1 M3x8
1 M3x12
1 M3x25
1 Nema 14 Motor with 6, 8 or 10 teeth.
1 BMG or RIGDA Gear Set
Screws can be BHCS or SHCS.
Also hosted here.
https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_Extruder_BMG#wristwatch-bmg
