Synaptics Coral Board (SL) – Slim DIN-Rail Module Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Synaptics Coral board that sits on a TS35 DIN rail like a regular 1-module device
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Currently printing, actual pictures coming soon
Low-profile screwed case for the Synaptics Coral board that sits on a TS35 DIN rail like a regular 1-module device: the board stands on edge, the rail runs across the case’s thin side, and the rail clip is on the back wall, opposite the USB ports. The ports, buttons and LEDs face out of the cabinet.
Required Hardware
Qty | Part | Notes |
|---|---|---|
4 | M3 × 14 screw | Closes the lid, into the base standoffs. M3 × 16 is too long |
4 | M3 heat-set insert, length ≤ 5 mm | Base standoffs; pocket Ø 4.2 × 5.1 mm |
2 | M3 heat-set insert, length ≤ 5 mm | DIN clip; pocket Ø 4.2 mm through the 5 mm plate, pressed in from the case side |
2 | M3 × 6 countersunk screw | Holds the clip, screwed from inside the base through the back wall. Not longer than 6 mm, or the tip comes out of the clip and presses on the rail |