Cold shoe adapter for Nikon 1V1 / Nikon 1 V2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.28 net (excluding VAT)
For file: Cold shoe adapter_0.4n_0.28mm_PLA_MK4S_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An adapter from the proprietary Nikon 1 i-TTL hot shoe of the 1 V1 and 1 V2 to a standard cold shoe.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
small and it had no hold on the port, which lead to it falling off.
This version uses a standard size cold shoe and a firm holding base to slide into the hotshot, just short enough to not touch the pins inside, though the 1 v1 and 1 v2 are old and from a discontinued line, the 1 v1 specifically has a special place in my heart, so its the camera i almost always reach for when going outside for street photography, the combination of lightning fast auto focus, a beautiful avf and its size is just something I've grown very accustomed to, with its biggest flaw being the low light performance (since its only a 1 inch sensor).
Sometimes i like to use my lark m2s (the receiver is visible on img) to take some quick video , explain something or capture audio, and not being able to mount it to the camera was PAINFULL, so though this design isn't the cleanest solution ( a cold shoe on a tripod would look better) its more portable, and has become a day to day carry for me in my mic case.
Hopefully someone else might also find this useful.
Also on this mode, i found that layer size doesn't really effect strength, 0.2mm and 0.28 were about the same.
Here's also the grip ive printed and i use: https://grabcad.com/library/wooden-grip-for-my-camera-nikon-1-v1-1
Really a great model, very comfortable even for someone with big hands like me.