1 / 8
Cold shoe adapter for Nikon 1V1 / Nikon 1 V2 — zdjęcie 1
1 / 8

Cold shoe adapter for Nikon 1V1 / Nikon 1 V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter from the proprietary Nikon 1 i-TTL hot shoe of the 1 V1 and 1 V2 to a standard cold shoe.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

small and it had no hold on the port, which lead to it falling off.

This version uses a standard size cold shoe and a firm holding base to slide into the hotshot, just short enough to not touch the pins inside, though the 1 v1 and 1 v2 are old and from a discontinued line, the 1 v1 specifically has a special place in my heart, so its the camera i almost always reach for when going outside for street photography, the combination of lightning fast auto focus, a beautiful avf and its size is just something I've grown very accustomed to, with its biggest flaw being the low light performance (since its only a 1 inch sensor).

Sometimes i like to use my lark m2s (the receiver is visible on img) to take some quick video , explain something or capture audio, and not being able to mount it to the camera was PAINFULL, so though this design isn't the cleanest solution ( a cold shoe on a tripod would look better) its more portable, and has become a day to day carry for me in my mic case.

 Hopefully someone else might also find this useful. 

Also on this mode, i found that layer size doesn't really effect strength, 0.2mm and 0.28 were about the same.

Here's also the grip ive printed and i use: https://grabcad.com/library/wooden-grip-for-my-camera-nikon-1-v1-1

Really a great model, very comfortable even for someone with big hands like me.

Tagi