1 / 3
PrintDry Pro 3 Filament Holder Upgrade — image 1
1 / 3

PrintDry Pro 3 Filament Holder Upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Load 3 spools instead of two, on rollers instead of axles! Designed to be easy to print!

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Modernize your PrintDry Pro system.

The stock unit is space inefficient and spools are painful to load. With this upgrade, users can load three 1 kg spools instead of two, and the unit is generally much more lenient with what spools are compatible.

Instead of using a convoluted 5 piece setup to ready a spool for loading, this upgrade uses rollers, allowing users to simply drop a roll of filament in.

All parts are designed to be printed in decent print orientation and no supports. Exploded diagram included in photos to help with assembly.

Additional required hardware:
(12 ct) 608 2RS Ball Bearings - I bought a 20 pack off amazon for 6.50. Two bearings per roller.
(2 ct) 8x300mm round metal rod. I bought a 2 pack stainless steel rod for 9.50. Material doesnt matter that much. The more important measurement is 8mm, because the bearing fits it. I believe you can go down to around 270mm rod (300 was just easier for me to buy, but they barely fit). I would not suggest going for 1 ft rods. I haven't tried them, but that extra few millimeters may cause them to not fit. 

Additional notes:
The rods don't need to be perfect because the filaments don't need precise rolling action in practice. but the two rods should be expected to withstand 85c heating and 4-5 kg sustained load. 

Be aware of what youre printing with. I used ASA-CF, which generally has a HDT of over 100C. If you use PETG or a less heat-resistant material, make sure it can handle the heat. 

When printing, use plenty of walls. I would suggest 6 walls 25% infill on a 0.4mm nozzle. Infill isn't as big a deal, but don't skimp on walls. Again, the assembly needs to hold 4-5 kgs under heat. 

Tags