1 / 4
Knurled Knob Set: M3, M4 and 6 mm D-Shaft — image 1
1 / 4

Knurled Knob Set: M3, M4 and 6 mm D-Shaft

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Four knurled knobs: M3 and M4 nut-trap knobs plus two 6 mm D-shaft knobs for pots and encoders.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A small set of knurled knobs for projects. Knob M3: 20 x 14 mm, diamond knurl, hex nut trap for an M3 nut. Knob M4: 26 x 16 mm, diamond knurl, hex nut trap for an M4 nut. Knob D-shaft: 24 x 18 mm, straight knurl, fits a 6 mm D-shaft, with an M3 set-screw hole. Knob D-shaft ribbed: 30 x 16 mm, ribbed grip, fits a 6 mm D-shaft. Files: one STL per knob, plus all four together as STL and 3MF. PRINT SETTINGS: layer height 0.16-0.2 mm, 4 perimeters, 20-25% infill. Print with the flat top face down, no supports (nut traps are open at the bottom). Slow the outer wall for a crisp knurl. Material: PLA or PETG. Fit: the D-shaft hole is nominal, so scale or ream it if your printer prints tight. All models were checked watertight (single shell, no non-manifold edges). Made with Knurl & Knob Maker for Blender: https://superhivemarket.com/products/knurl-knob-maker

Tags