1 / 4
Knurled Knob Set: M3, M4 and 6 mm D-Shaft — zdjęcie 1
1 / 4

Knurled Knob Set: M3, M4 and 6 mm D-Shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four knurled knobs: M3 and M4 nut-trap knobs plus two 6 mm D-shaft knobs for pots and encoders.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A small set of knurled knobs for projects. Knob M3: 20 x 14 mm, diamond knurl, hex nut trap for an M3 nut. Knob M4: 26 x 16 mm, diamond knurl, hex nut trap for an M4 nut. Knob D-shaft: 24 x 18 mm, straight knurl, fits a 6 mm D-shaft, with an M3 set-screw hole. Knob D-shaft ribbed: 30 x 16 mm, ribbed grip, fits a 6 mm D-shaft. Files: one STL per knob, plus all four together as STL and 3MF. PRINT SETTINGS: layer height 0.16-0.2 mm, 4 perimeters, 20-25% infill. Print with the flat top face down, no supports (nut traps are open at the bottom). Slow the outer wall for a crisp knurl. Material: PLA or PETG. Fit: the D-shaft hole is nominal, so scale or ream it if your printer prints tight. All models were checked watertight (single shell, no non-manifold edges). Made with Knurl & Knob Maker for Blender: https://superhivemarket.com/products/knurl-knob-maker

Tagi