Slim Lens Cap for OBSBOT Tiny 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-profile snap-on privacy cap for the OBSBOT Tiny 3 webcam, with a gimbal pivot cutout and recessed lettering.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A low-profile snap-on privacy cap for the OBSBOT Tiny 3 webcam. It covers the whole front of the camera head and leaves one side open for the gimbal pivot, so it slides on and off without moving the camera.
Features: 4.85 mm thin with rounded edges. Three grip ribs hold it in place without tools. Cutout for the gimbal pivot disc. "OBSBOT TINY 3" lettering recessed into the face. Parametric OpenSCAD source included.
Print settings: 0.4 mm nozzle, 0.2 mm layers (0.16 mm for finer text), 3 walls, 20% infill, no supports, no brim. Print face down as exported. PLA or PETG; TPU for a softer grip.
Fit: clearance is 0.25 mm per side. If it is loose, set clr to 0.15 in the .scad file; if tight, set it to 0.35, then re-export the STL in OpenSCAD.
Not affiliated with or endorsed by OBSBOT. OBSBOT and Tiny 3 are trademarks of their owner.