1 / 3
Bungee T-Anchor for XDEEP Stealth Waist Bungee (6 mm) — image 1
1 / 3

Bungee T-Anchor for XDEEP Stealth Waist Bungee (6 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Toggle for the 6 mm waist bungee of the XDEEP Stealth sidemount harness. v2: 6 mm thick. Prints flat, no supports.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
4
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Anchor-shaped toggle for the waist bungee of the XDEEP Stealth sidemount harness, made for 6 mm bungee cord (two strands). The bungee loop goes through the hole in the head; the two hooks between the crescent and the neck catch the strands, and the 11.1 mm hook entry holds the bungee by its own tension, no pinching needed.

v2 (November 2026): the body is now 6 mm thick instead of 4 mm. Same outline and fillets.

  • 44.7 x 47.2 x 6.0 mm; about 3.8 g and 20 min on a P2S at 0.16 mm (Bambu Studio estimate)

  • Head hole 15 x 8.9 mm, 5.88 mm wall around it; 9.24 mm neck

  • All wall thicknesses are multiples of the 0.42 mm line width

  • Exact CAD (B-rep): spline outline, real R1 fillets on every edge, no stepped mesh

  • Prints flat, no supports, single color

Files: 3MF (Bambu Studio project, sliced with the P2S 0.16 profile), STL, STEP.

Photos: my black PETG prints of v2.

Print settings: Bambu Lab P2S, 0.4 mm nozzle, 0.16 mm High Quality, PETG, 2 walls, 15% gyroid.

Tags