1 / 3
Bungee T-Anchor for XDEEP Stealth Waist Bungee (6 mm) — zdjęcie 1
1 / 3

Bungee T-Anchor for XDEEP Stealth Waist Bungee (6 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toggle for the 6 mm waist bungee of the XDEEP Stealth sidemount harness. v2: 6 mm thick. Prints flat, no supports.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Anchor-shaped toggle for the waist bungee of the XDEEP Stealth sidemount harness, made for 6 mm bungee cord (two strands). The bungee loop goes through the hole in the head; the two hooks between the crescent and the neck catch the strands, and the 11.1 mm hook entry holds the bungee by its own tension, no pinching needed.

v2 (November 2026): the body is now 6 mm thick instead of 4 mm. Same outline and fillets.

  • 44.7 x 47.2 x 6.0 mm; about 3.8 g and 20 min on a P2S at 0.16 mm (Bambu Studio estimate)

  • Head hole 15 x 8.9 mm, 5.88 mm wall around it; 9.24 mm neck

  • All wall thicknesses are multiples of the 0.42 mm line width

  • Exact CAD (B-rep): spline outline, real R1 fillets on every edge, no stepped mesh

  • Prints flat, no supports, single color

Files: 3MF (Bambu Studio project, sliced with the P2S 0.16 profile), STL, STEP.

Photos: my black PETG prints of v2.

Print settings: Bambu Lab P2S, 0.4 mm nozzle, 0.16 mm High Quality, PETG, 2 walls, 15% gyroid.

Tagi