Cellular Shell Cylinder Planter (planter + drip tray) – Planter a Day #009
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Generative cellular shell cylinder planter, 99 mm. Free STL + ready Bambu A1 3MF, prints without supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Daily generative planter #009. Comes with an 8 mm drainage hole and a matching drip tray generated for its exact footprint.
Style: cylinder, superformula + hex texture, 20° twist. Size: 99 mm tall, 108 mm at the widest point, base Ø 92 mm.
Any slicer: 3 walls, 6 bottom layers, 0% infill and 0 top layers (no spiral vase). A ready Bambu Lab A1 3MF is included (~1h47min and 88 g of PLA on a Bambu Lab A1 (0.4 nozzle)).
Print tips:
Pot and drip tray are on the same plate in the 3MF (also as separate STLs)
The pot prints hollow from the solid model: 3 walls, 6 bottom layers, 0% infill, no top layers
Raised ribs in the tray keep the pot above the drained water
PETG recommended for water and sun; PLA works indoors
Water drains through the bottom hole into the tray; empty the tray if water sits for long.
About this design: generated procedurally by my own Python code (parametric geometry and growth / reaction-diffusion / noise simulations). No generative AI was used. Images are 3D renders (Blender) of the exact downloadable model.