1 / 5
Spray bottle holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted holder for four spray bottles, attached with three M4 × 15 mm screws.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 22
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v3.0
A wall-mounted holder for four spray bottles. The holder is 220 × 55 × 40 mm and has three Ø4.5 mm mounting holes. Attach it with three M4 screws, 15 mm long.
Bottle necks and trigger shapes vary, so check that your bottles fit the hooks before printing a full set.
Was designed mainly for "Frosh" bottles.
Printing
Material: PETG (CR PETG)
Nozzle / bed: 250 °C / 80 °C
Layer height: 0.2 mm
Wall loops: 2
Infill: 15% Gyroid