Dokken Name Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In My Dreams! Print 80s melodic metal legends Dokken's classic logo plaque with border plate and keyhole alignment jig.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Breaking the Chains for your studio, music room, or metal den! This 3D wall display plaque captures the iconic, blade-underlined gothic typography of 80s melodic metal legends Dokken.
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Border Styling & Custom Alignment Jig:
Border Only Option: Designed with a form-fitting full backing border plate (0.125” thick) that unifies the sharp blade underline, floating letter elements, and checkered cutouts into one solid display piece.
Included Keyhole Alignment Jig: Includes a custom printable mounting template to make hanging effortless. The vertical centerline groove on the jig marks the exact horizontal center of the logo so you can easily align and mark your fastener holes on the wall.
Easy Multi-Color Printing:
With a 0.125” base border plate and 0.375” raised lettering (0.5” total thickness), executing a manual z-height filament swap in your slicer makes the sharp black lettering and intersecting blade cutouts pop right off a clean white backing—no multi-material hardware (AMS/MMU) required.
Dimensions
Text Width: 11”
Text Height: 3.35”
Text Thickness: 0.375”
Border Width: 11.2”
Border Height: 3.55”
Border Thickness: 0.125”
Total Thickness: 0.5”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws for a completely flush wall mount (use the included alignment jig to easily center and level your wall marks).
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the sharp blade points and blocky angles of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Orientation: Rotate diagonally on standard 220x220 print beds.
Supports: None required when printed flat on the bed.
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: