Tufty Boy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retro handheld shell for Pimoroni Tufty 2350
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 16
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 90's style handheld body for the Tufty 2350.
Size: 86x147x25mm
Print : PLA, each STL already in its print orientation
You Need :
- Tufty 2350
- Qw/ST Pad and a Qw/ST cable,
- 4 × M2.5 × 20 and 2 × M2.5 × 25
- 4 × M2.5 heat-set inserts
Assemby :
1. Melt the 4 insert into the front shell
2. Lay the front shell face down. Slide in the lens, then the D-pad, A, B, Select and Start.
3. Plug in the Qw/ST cable and set the Pad on the pins of the caps
4. Put the home and reset plungers in the back shell, then close it.
5. Fit the hump on its 2 pins and drive the 6 screws in from the back