1 / 8
WiFi Filament Spool Scale (ESP32-C3 + HX711, custom PCB) — image 1
1 / 8

WiFi Filament Spool Scale (ESP32-C3 + HX711, custom PCB)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

5 kg load cell spool holder tracks filament in g, m and %, alerts before empty, and supports WiFi/Home Assistant.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Never run out of filament in the middle of a print

Design status: This complete open hardware design has not yet been assembled or tested as a physical prototype. Product photographs are computer-generated visualizations based on the CAD. Fit, load-cell readings and calibration remain to be checked on the first build.

The WiFi Filament Spool Scale is designed as a roller spool holder with a 5 kg load cell under the cradle. Its OLED is designed to show remaining filament in grams, meters and percent while the printer pulls filament from the spool.

Features

• Filament remaining in grams, meters and percent (12 material presets, 1.75 / 2.85 mm)

• Low-filament buzzer alarm with adjustable threshold and mute button

• WiFi web dashboard and JSON API (/api/status) for Home Assistant

• Spool rolls on four 608 bearings while printing

• Fits spools up to 92 mm wide and 100–300 mm in diameter (up to about 4.5 kg)

• Custom 2-layer PCB: ESP32-C3 SuperMini, HX711 24-bit ADC, 0.96-inch OLED, 3 buttons and buzzer

• Every part prints without supports

Printed parts

• wfs_base (1): electronics bay, load-cell pedestal and cable clip

• wfs_lid (1): 45-degree OLED window; prints top face down

• wfs_cradle (1): bolts to the load cell and has four drop-in axle slots

• wfs_roller (2): one 608 bearing pressed into each end

• wfs_axle (2): 8 mm core; 6 mm ends drop into the slots

• wfs_lc_spacer (1): 3 mm spacer between load cell and cradle

Hardware

• 1 × 5 kg straight bar load cell, 80 × 12.7 × 12.7 mm (TAL220 type)

• 4 × 608 bearings (8 × 22 × 7 mm)

• 2 × M5 × 12 socket-head screws (load cell to base)

• 2 × M4 × 14/16 countersunk screws (cradle to load cell)

• 4 × M3 × 16 countersunk screws (lid)

• 4 × 12 mm rubber feet (optional)

• Custom PCB (ESP32-C3 SuperMini + HX711 + 0.96-inch OLED + buzzer), USB-C cable and 5 V charger

Print settings

PLA or PETG, 0.2 mm layers, 3 walls (4 for the cradle), 20% gyroid infill and no supports. Print axles and spacer at 100% infill. The lid prints top face down, as oriented in the file.

Assembly

1. Screw the load cell onto the base pedestal with two M5 screws from below. The cable end faces the electronics bay; the arrow on the load cell points down.

2. Put the spacer on the free end and fix the cradle on top with two M4 countersunk screws.

3. Press two 608 bearings into each roller, slide the roller onto an axle and drop the axle ends into the cradle slots.

4. Route the load-cell wires under the clip and through the bay slot. Solder them to the PCB: E+ red, E− black, A− white, A+ green.

5. Place the PCB on the four bosses (USB-C in the side notch) and close the lid with four M3 × 16 screws.

6. Power it with the cradle empty (the first boot zeroes the scale) and calibrate once with a known weight (hold OK > Calibrate).

The schematic, PCB files, firmware (Arduino / PlatformIO) and complete build guide are on the PCBWay project page.

PCBWay design files & fabrication

This project’s custom PCB is designed for manufacture by PCBWay. Download the project files, schematics and BOM from the PCBWay Community page: https://www.pcbway.com/project/shareproject/Building_a_WiFi_Filament_Spool_Scale_with_ESP32_C3_and_HX711_cd168e71.html

PCB fabrication and assembly services: https://www.pcbway.com/

Image disclosure: ai_01_hero, ai_10_lifestyle, ai_02_electronics, ai_06_back and ai_07_pcb_bay are computer-generated visualizations based on the CAD. The remaining images are CAD or screen captures. No assembled prototype photographs are included.

Tags