Voron V0 Modesty Mesh – Cable Cutouts + printable on V0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the V0 modesty mesh with corner cutouts for cables in the extrusion channels, split into two dovetailed halves
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a remix of the Voron V0 Modesty Mesh by Maple Leaf Makers, with two changes:
1. Cable cutouts: If you run LED strips or carbon filter fans through the extrusion channels, the original mesh covers the cable path. This version has a notch (5 × 5 mm, cut down to rail height) at both end-block corners along one long edge, on the chamber side. The clip tabs are unchanged and the outer face stays closed.
2. Printable on a V0: The model is split at mid-length with three dovetails to fit on the Voron V0 build volume, push the halves together and add a drop of glue.
Model provided as multipart to print as per the original with zero top/bottom layers and your choice of infill.