Voron V0 Modesty Mesh – Cable Cutouts + printable on V0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the V0 modesty mesh with corner cutouts for cables in the extrusion channels, split into two dovetailed halves
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of the Voron V0 Modesty Mesh by Maple Leaf Makers, with two changes:
1. Cable cutouts: If you run LED strips or carbon filter fans through the extrusion channels, the original mesh covers the cable path. This version has a notch (5 × 5 mm, cut down to rail height) at both end-block corners along one long edge, on the chamber side. The clip tabs are unchanged and the outer face stays closed.
2. Printable on a V0: The model is split at mid-length with three dovetails to fit on the Voron V0 build volume, push the halves together and add a drop of glue.
Model provided as multipart to print as per the original with zero top/bottom layers and your choice of infill.