Storz-Bickel disposable bag conversion kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Take apart the disposable bags and turn them into re-useable bags!
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 237
- Makes
- 0
- Views
- 1,297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Take apart the disposable bags and turn them into re-useable bags! Parts are compatible/interchangeable with the original Easy valve kit!
Print it with a good amount of infill for strength, I did 90%. I used support for the insert. Do not use supports on the adapter ring, The tabs would likely be stronger printed on its side with supports. However, I slightly reinforced the tabs compared to the original and have not any tabs break.
Simply pop out the clear plastic insert, replace it with the 3D printed insert. DO NOT FORGET TO RE INSERT THE SMALL CLEAR PIECE OF RUBBER, it acts as the check valve. Use an O-ring to secure the bag with the 3D printed securing ring over that. Use your spare O-ring that came with your original kit, or you can re-use the O-ring that was around the old insert. Reusing the O-ring will leave the securing ring slightly looser but will still function fine.