TK44 keyboard wall hooks for HSW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two hooks that hang a TK44 keyboard in its printed tray flat on the wall, keys out, USB-C up.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Hangs a TK44 keyboard in its printed tray flat on the wall, like a desk turned up: keys out, USB-C up, tray bottom 5 mm from the panel.
Two hooks (L and R) go under the lower outer corners of the keyboard body, 12 HSW columns (245.28 mm) apart, one insert-style peg each.
The keyboard drops in from above; the ledge slopes down to the middle, so it centres itself.
The lip has cut-outs for the switch housings and sits under the keycap skirts.
Each hook 25.5 x 29.2 x 20.2 mm, about 6.7 cm3.
This version (v3) is not print-tested yet; v2 was printed and its problems are fixed here.
Printing: upright, back plate vertical, pegs horizontal, as the files are oriented. No supports. Layer 0.2 mm, 3-4 perimeters, 20% infill, PETG or PLA.
Designed for the standard Honeycomb Storage Wall panel by RostaP. Files: STL, 3MF and STEP for each hook.