1 / 2
TK44 keyboard wall hooks for HSW — zdjęcie 1
1 / 2

TK44 keyboard wall hooks for HSW

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two hooks that hang a TK44 keyboard in its printed tray flat on the wall, keys out, USB-C up.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Hangs a TK44 keyboard in its printed tray flat on the wall, like a desk turned up: keys out, USB-C up, tray bottom 5 mm from the panel.

  • Two hooks (L and R) go under the lower outer corners of the keyboard body, 12 HSW columns (245.28 mm) apart, one insert-style peg each.

  • The keyboard drops in from above; the ledge slopes down to the middle, so it centres itself.

  • The lip has cut-outs for the switch housings and sits under the keycap skirts.

  • Each hook 25.5 x 29.2 x 20.2 mm, about 6.7 cm3.

  • This version (v3) is not print-tested yet; v2 was printed and its problems are fixed here.

Printing: upright, back plate vertical, pegs horizontal, as the files are oriented. No supports. Layer 0.2 mm, 3-4 perimeters, 20% infill, PETG or PLA.

Designed for the standard Honeycomb Storage Wall panel by RostaP. Files: STL, 3MF and STEP for each hook.

Tagi