Mobile personal protection for electrical repairs
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.57 – €0.70 net (excluding VAT)
For file: din-trail_0.6n_0.32mm_PETG_COREONE_20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 20.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project from heise Make Magazine DE6/26 - https://www.heise.de/select/make/2026/6/2625115295311558604
For original parts see:
https://github.com/MakeMagazinDE/Personenschutz
Components I used :
Control lights: https://www.amazon.de/dp/B095SGRXV1?th=1
Switch: https://www.amazon.de/dp/B0DY17Z3B8
Amperemeter: https://www.amazon.de/dp/B0HC5L16TT?th=1
Fuse: https://www.amazon.de/dp/B000UW2RPO
RCD 10mA: https://www.amazon.de/dp/B08WPDB87W?th=1
230V Socket: https://www.amazon.de/dp/B086K7HB9N?th=1