Counting matching models…
Walter White and Heisenberg Hat. With Added Scalp resized to help create boolean and design your own hat. Use the scalp ( walterwhitescalpforhatboolean ) to remove the appropriate space in your hat so it will fit. Baseball cap, French…
Awesome multi-piece printable model of 1990's (Heisei) Godzilla
Simple bookmark with Heisenberg from Breaking Bad. You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
Printed this one with 0.25mm nozzle for better detail and function. When putting on microphone is need to be very careful because is very tiny thing so you could damage it. After putting on microphone it works as original! If you like my…
I tried to do a 3D case for the following projekt: https://www.heise.de/ratgeber/Bastelprojekt-Taupunkt-Lueftungssystem-bauen-und-Keller-trockenlegen-6356018.html So i started to create one with an LCD2004.
I made this stand because of using microphones on daily basis and rolling of them on tables was terrifying! For this design you need: 4x cabinet door bumpers (10mm) 1x furniture leg soft sticker If you like my work please support me. :-)…
Updated the model on March 10/2025 Widened the inner ring where the cushions go on to make them stay on better. Wanted a way to potentially get new ear cushions for my Momentum 4 headset as the the OEM ones have the pads glued to the…
Model This allows you to hard mount a Sennheiser G2/G3/G4 RX or TX Lavalier pack on your camera rig / audio recorder. You can either use the stainless steel belt buckle to attach the 3D printed plate or double sided tape (Recommended -…
The OG Heisenberg - Golf ball marker. I needed to file a bit down after printing in the goatee area, but it'll work with a super fine tip marker.
MY PRINT SETTING FOR THIS MODEL: -Nozzle 0,40mm -Layer 0,08mm -Infill 5% -Walls 2 -Support auto tree
I wanted a headphone stand for my Sennheiser HD800S, but I didn't want one that would wear out the padding over time. This stand does not touch the padding at all. This prints without any supports on my Bambu X1C. I'm pretty new to…
**NEW VERSION IN PROGRESS** (as of 11/6/25) Easy way to store Sennheiser EW G4 Bodypacks. Fits good in a 4U Drawer.
Printed with 100% Infill ~ 60g ~ 6h sorry for the poor pic - changed some details on my printer and used really poor filament with very wild changing cross-section…. horrortrip xD I packed different insulations and stayed with the one in…
Mount to to put a pair of Sennheiser G3 receivers on a camera. One receiver snaps on the print, the second one is attached using a Sennheiser CA2 Shoemount Adapter for EW Series Camera Mountable Receivers. Uses a heat set ¼-20 insert in…
FDM printing, layer hight 0.06mm, make the printing speed slower. enjoy!
I've only recently been able to watch Breaking Bad. I was impressed and made this model.
A great Wall Art of Heisenberg, famous character of Breaking Bad. Do not forget to upload your makes, thanks ! Inspired by a sticker
Replacement for the original to use with ATH-M50X earpads. Cut small holes on the earpad lip corresponding to the holes on ring. Can be a little fiddly to get the cut lip holes to align with the holes on the ring to install but once done…
Perfect model by Ash except I wanted to attach it direction to a rod clamp and needed to hide the ¼-20 bolt ahead within. Viola!
i've created a base for Heisenberg alias Walter White of Breaking_Bad. Obviously is made of crystal-meth ;-) Category: People
designed for 0.25 nozzle printed without supports on prusa MK3s+ on 0.05 resolution Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.05 Infill: 100 Filament: Prusament PLA Galaxy Black Category:…
EW-DX SK This may work with EW-D SK packs, it looks like the same body but I don't have it to test it. This is designed to hold the pack with the belt clip attached. My Other Version:…
My frind gave me his broken headphones to fix as a fun sideprojekt. Turned into a very long learning experience. First I tried to model the part myself from scratch but the shape of this piece is incredible comlicated and has no points to…
This is a concealer to use with a bit of wire and a for / moleskin to attach your Sennheiser ME2 (the old one with detachable windshield) to a shirt etc. Similar to bubblebee. I printed on MK4s with FLEX in 0.15 LH, Nozzle 0.4, 15% fill,…
Break or lose the little plastic piece that keeps the headband padding from sliding out of your Sennheiser headphones? Here's a replacement. This fits my HD650s. They should fit the other headphones in Sennheiser's line that look similar.…
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent…
One common application of the Sennheiser's MD 421 microphone is to record toms. The original mic clip does not work well with drum mic clamps as it is too close to the drum skin. Instead, it usually ends up using a mic stand to orientate…
Bottom Ring/Wire socket for the Sennheiser 6x0 series of headphones. v7 matches more of the 580/58x design v9 matches 600/650 and the Capra Headband 6x0 yoke design If you need help with printing? Have questions about the designs? Want to…
EW-DX SK This may work with EW-D SK packs, it looks like the same body but I don't have it to test it. This is designed to hold the pack with the belt clip attached. My Other Version:…
This was created in Fusion 360 from a 2d piece of art I found on the internet. Slice it at 0.2mm and each color change will fall exactly on a new layer. Throw in an M600 command anywhere you want to change colors and print away. These…
EW-G4 SK100 This may work with older generation SK100 packs, it looks like the same body shape but I don't own any. Due to the odd shape of the pack, it does move around quite a bit in the holder and isn't as tight as my EW-DX holders. In…
Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545 Depicted in the photo is an HD58x with Shure SRH1540 Alcantara Ear Pads. If you remove the stock foam and use the included foam on the Shure ear pads you get a very…
A small adaption to the
This plate replaces the joining plate found in the Sennheiser GA4 rack mount kit for the Senneheiser Speechline SL DW wireless microphone receiver. It enables two receivers to be mounted side by side. I suspect that it will also replace…
Adapter from standard microphone holder to microphone Sennheiser MZH3040+ME36
Please note that, due to the conical shape of the microphone, inserting it is much easier than getting it out. The dimensions of the model give a nice fit with my printer, but it might be too tight with other printers. If you have to…
If you need help with printing? Have questions about the designs? Want to keep up with what we're prototyping? Join our discord https://discord.gg/fb4HdDvErF Additional Affiliate Links if you want to support us further: Polymaker 95a TPU…
So this is a cap to keep the diaphragm and mic body of the e604 from falling out the end when you plug a cable into it. This is handy if some silly drummer smashed your $100 microphone and you want to get a little more use out of it…
This is a copy of the plastic clip that comes with the “MZQ 02 Crocodile clip”. I printed it on a Ender 3 V2 0.4mm nozzle. It MUST be PETG , with PLA it breaks.
Replacement Earclip for my Sennheiser bluetooth headset. First print of my new assembled MK3S.
Description on reddit: https://www.reddit.com/r/headphones/comments/4060mp/i_have_finalized_my_hd_25_detachable_cable_mod/ If you want design files, ask.
Instructions here: https://github.com/CapraAudio/SennheiserAftermarketConnectors/new/main?readme=1 Additional Affiliate Links if you want to support us further: Polymaker 95a TPU Polymaker PLA Pro Polymaker PETG
How i designed this The hinge on my stock case broke A new case is $100 The earbuds cost $100 used … Spent several weeks desinging a new one from scratch How to print I printed it in PETG, but PLA should also work. The 3mf file includes…
2 piece design so supports aren't needed. They fit tight together but you can glue them for a secure fit. Made to suit Brainwavz oval ear pads.
This model is to neatly store 3 kits of Sennheiser XSW-D wireless audio kits for charging in our equipment loans department. The mounts are set so any of the different size units can fit in all positions and charger cables can be neatly…
This part is designed to to hold a piece of foam or other material over the driver to tweak the sound signature. Installation: Press the part carefully on the driver assembly, (glue is not necessary). Printed with Creality Ender 3, using…
This is an add to a model from ThingWizard on thingiverse.com. I added the base and fixation screw. It needs : a 3/8' (microphone stand size) ruthex insert for the base a M6 ruthex insert for the fixation, a M6 bolt with square base (see…
This is a case for the Sennheiser SoundProtex Plus earplugs, with space for the included filters. I printed in PLA without any supports. It's an easy print. The “silence” sign is imprinted in Prusa Slicer and included in the downloaded 3mf.
My brother asked me to fix his Sennheiser GSP 370 that was no longer taking charge with the Micro-USB port. The battery was certainly not dead as it was working very well for hours (until flat). This mod requires you to drill in your…
All the STL files differ in desk thickness parameter. If you desire an unlisted desk thickness, I propose downloading F3D file and editing user parameters in Fusion 360. You can choose major diameter, minor diameter and desk thickness…
Sennheiser HD650 Headset upgrade Transform your headphones into a headset. Suitable for left and right. Suitable for the lavalier microphone Comica Lavalier Mikrofon, CVM-V0 (or capsules up to 7.8 mm diameter). After the microphone and…
I printed it with TPU, but the dimensions are fine if you want to print it on pla, and ad a sponge on the inside to make it softer, it can be printed on a 220x220 bed
Made this model for easy display and access to my body-packs. It rests on top and is secured by the model's geometry so there is no movement. Just 2x1 footprint. Magnets supported
This clip is designed to replace the includes camera shoe mount clip that comes with these Sennheiser kits. We loan these kits to students and the clips are fragile and likely to break. Sennheiser doesn't sell spare so I set about…
This Model is a simple conversion for your Softcase of the Momentum 3. There are sollutions to just print a completely new case but thats wasting Filament. So i made this. A simple ring that you push into your Softcase and boom! You have…
Dust cover for the Drop Sennheiser HD58x Jubilee and Drop Sennheider HD6xx. If you have slightly smaller or larger pads/cushions but with the same shape, you can simply adjust the size in you slicer. The cover was measured with new and…
Scale to your preference. File as is 100mm long ~4 inches
Having dropped and lost the SET button for a Sennheiser EW100 G2 wireless mic pack, I designed this as a replacement. It's not quite as nice as the real switch which includes some elastomer but it works. I used a 0.25mm nozzle with PLA on…
This is a desk stand for the classic Sennheiser MD 441 microphone. I wanted it to look like the original MZT 441 stand you could buy for the microphone, but since I didn't have one myself I modeled it after reference images. Still, from…
Size : 350 mm x 282 mm Thickness : 0.6 mm Yeah, it's not meant to be small so the model is quite big, although you can scale it down reasonably. At full size, the print time should be around 1h with a classic 0.2 layer height.
Mounting bracket for Sennheiser L70 USB battery charger, screwable with recessed nuts (M3) inset.
náhradní mřížka na mikrofon sennheiser puvodní kroužek doplněn o ochranu vnitřku
Do you like this movie as much as I do? Print in two parts or with a replacement filament. If you print in parts, you will need to glue the picture onto the plate. There is a contour on the plate. I printed with a 0.3 layer and a fill of…
Intention of the design is a microphone clip for a wireless headset microphone like a Sennheiser headset/ear loop microphone.
I imported the original STL into Fusion 360, took some measurements, adjusted the sizes for the case of the TW4, which is a bit smaller than previous models. I also made the hole for the USB plug a bit smaller to get a press-fit. I had to…
Aufbewahrung für Stecheisen mit Ausbuchtung für Magneten, Storage for Chisel
I've had the problem of actors and speakers accidentally pressing the power button on the Microphone , muting themselves/turning the mic off. This cover slides over the antenna and blocks the button from accidentally being pressed. The…
So, after 5 years with these pair of headphones, they became very loose. After a bit of research, i discovered that they were held in place by friction between the metal headband and a pair of plastic sliders that were worn out. To take…
I printed it with Prusament PLA with the default MK4 printer profile using a layer height of 0.15 mm. Two 4 mm countersunk head screws are required.
I don't like putting pressure on my headphones pads when I hang them on their holder. This one holds them on the plastic sides without touching the foam. You can basically scale them to hold any headphones that way. Tested succesfully…
Easy way to store Sennheiser XS Bodypacks. Fits good in a 4U Drawer.
The small adapter has a fin that screws in behind the cable guide. Original screws can be used. The modmic adapter clip seats in the recess.
This is a Do not Disturb sign to clip on my Sennheiser Momentum 2 Over Ear Headphoines. I created it because it is often very loud in my office and nobody gets the message not to disturb me, when i have my Headphones on, so i have to be a…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Wall art plaque inspired by the “Heisenberg” character from Breaking Bad, in a…
This is a piece I designed emulating the original part from Sennheiser HD-201 heaphones that broke. Just print 0.2mm layer without support with the small flat surface on the bed, and you're ready to go. Category: Audio
The different parts (hard tray, soft tray 1 and soft tray 2 are printed separately and glued together, although the fit is fairly tight. The soft trays are printed in TPU. Prints without supports.
The hinge on my charging case for my headphones broke and a replacement case is not only hard to find but expensive for what it is. So since only the bottom half broke and the electronics inside still work I decided to make it myself.…
This design prioritizes minimal material usage while effectively channeling your entire headphone cable. Applied with double-sided sticky tape to the back of each segment Print two 50mm segments for longer rails so you can offset them at…
A new 3D figurine generated by AI, a Chibi Walter White Heisenberg (Breaking Bad). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and…
This is a remix/mashup of several existing designs I found and modified to my needs. The clips fit on the Aero band nice and snug if you put them on where the band narrows just behind the tilt adjustment knobs and slide the clips back.…
This is replacement for broken original headband clip for my headphones Sennheiser HD535.
Sennheiser SK150/250 mic lavalier organizer. So you can pack cable and mic on the transmitter
The stock cable on Sennheiser cables is pretty bad, it's really just two cables that are glued together, with a piece of heatshrink to keep them together so that the cables don't peel apart, but that heatshrink over time gets loose and…
Model of a 5212 body pack to assist in making pouches.
Instead of fiddling with connecting the USB type c-connector cable I just place the whole case in this charging stand. Category: Music
About The Sennheiser SoundProtex Plus has many filters for many situations in life. But the case that comes with them is just a little baggie with a zipper and no way to fix or manage the 6+2 tiny filters. A bit silly for 70 bucks of…
T50RP in an HD58x shell This is a niche mod for those of you who have access to a 3d printer AND have a 58x and t50rp drivers, but for those of you who do i recommend you try this. This takes the grainy hd58x and the bland sound signature…
Allows a Sennheiser E935 microphone to be placed in a 45mm diameter shock mount. Designed to hold the microphone around its center of mass, to reduce strain on the shock mount. I have included a rough STEP model of the microphone for…
Heisenberg ring, for breaking bad fans. No supports needed.
Werner Karl Heisenberg ( /ˈhaɪzənbɜːrɡ/ ; [2] German: [ˈvɛʁnɐ kaʁl ˈhaɪznbɛʁk] ⓘ ; 5 December 1901 – 1 February 1976) [3] was a German theoretical physicist , one of the main pioneers of the theory of quantum mechanics , and a principal…
Designed a simple holder for my Sennheiser Momentum True Wireless 2 to fit the Ikea Skadis system. I chose the orientation on print bed the same as later installed. Support needed. Supported areas won't be visible after removal of the…
Sennheiser HD650 bottom ring May be compatible with some HD6* models. Suitable for left and right. Recommended printing setting: Support only on print bed Overhang threshold: 20 Feel free to support my work and leave a tip.
Gridfinity box that will fit the case of your Sennheiser Momentum True Wireless 2.
A gridfinity holder for the Sennheiser CX True Wireless headphone case. It's not an exact fit but it stays in snug enough and leaves the charging port exposed to plug into.
Allows fitment of Bose headphone ear pads to Sennheiser headphones. (Tested with Sennheider HD206 and Bose QC15 headphones only - YMMV.) I bought some basic Sennheiser headphones (HD206) and found the ear pads thin and uncomfortable. As I…
New earpads for Sennheiser Unipolar 2000 and 2002 headphones are long out of production. With this adapter, which fits the inner clips of the headphones, it is possible, to use replacement earpads for AKG K-300 and K-301. You have to slip…
