Pocket Cade - Pimoroni Badgeware Cyberdeck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a mini upright arcade cabinet for a Pimoroni Badgeware badge!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Its a tiny upright arcade cabinet that turns the Badgeware badge into a tabletop game machine. The screen shows through a bezel, its five buttons are extended up through the bezel as printed keycaps, and the cabinet is shaped around the badge's own wedge-shaped back, so the whole thing is slim.
***PRINT SETTINGS***
No supports needed. Use 0.2 mm layers, 3 perimeters, and 15% infill.
***ASSEMBLY***
Lay the bezel face-down, Push the five keycaps in from the back: step through the hole, flange stays behind the plate. A, B, C go in the bottom row; UP on the right above and DOWN below UP
Stand the body up and drop the badge in from the front, screen facing you, lanyard edge up, bottom edge resting on the floor of the cabinet
Slide the bezel down from the top along the two dovetail rails until it stops on the ledge. The keycaps should now sit over the badge's buttons
Press the marquee cap onto the top. It locks the bezel in place. To take the badge out, pull the cap off and slide the bezel up.