1 / 9
InMoov Petit (Part 5 of 10) Hips — image 1
1 / 9

InMoov Petit (Part 5 of 10) Hips

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

InMoov Petit (Part 5 of 10) Hips

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution — Noncommercial — Share Alike

Here are the Hip parts to connect into InMoov Petit's upper torso panels.

It uses a Standard Generic MG946R Servo for upper part (highly recommended to use Metal Geared servos throughout) and a Standard Generic MG90S for the lower part.

Here you see the left leg , MG946R Servo is placed inside the Servo holder (Green) note that there is a a baseplate (Red behind) which need to be glued to the baseplate , the servo cradle (Red) is pinned in place with some spare filament (White) , the cradle is glue attached (also with some white filament) to the lower MG90S Servo holder (Pink). The lowest (Orange) part is the eventual attachment point for the upper thigh.

This exploded view shows the way to assemble the individual parts.

This exploded view shows the way to assemble the individual parts.

Please note you need 2x of the 20261112_Servo_Horn_Blanking_Pivot's , these are used as pivot points , top right of the above picture you see one that is glued into the back torso part (Green) the pivot pin (Filament) passed through the hole and into the back of the top servos (Red) plate,

The bottom 20261112_Servo_Horn_Blanking_Pivot hides inside the Thigh mount bracket (Orange) and a filament pin poked through sticking into the base of lower servo mount (Pink).