TIDELINE | Flowing Catchall Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flowing two-pocket tray for keys, coins and desk clutter. Two sizes, one-piece prints, no assembly.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small landing spot for the things that usually end up scattered across a desk or bedside table.
TIDELINE has two long, shallow pockets separated by a gentle wave. Keep keys on one side and coins or jewellery on the other, or use it for paperclips and the little bits on your workbench. The floors are smooth, with no decorative grooves to collect dust.
It prints in one piece. There are no inserts, magnets, screws or parts to fit together.
Pick a size
- Standard is the suggested starting point: about 174.6 x 123.4 x 18 mm overall.
- Compact is 84% of Standard: about 146.6 x 103.7 x 15.1 mm overall, for smaller spaces and smaller loose items.
Dimensions are rounded overall mesh dimensions; the CAD construction parameters and exact export measurements are included with the source. These are open pockets, not fitted holders for a particular device.
Printing
- Print flat, with the open pockets facing up, exactly as supplied.
- PLA is a straightforward starting point. Matte PLA should suit the broad curves nicely. PETG is another material option, but has not been sliced for this release.
- Suggested baseline: 0.4 mm nozzle, 0.20 mm layers, 3 walls, 5 top and bottom layers, 15% infill.
- Supports are unnecessary in the checked PLA setup: both sizes were sliced with automatic supports enabled and generated no support extrusion. Use your own printer's material and bed settings.
- No assembly or post-print fitting is needed. Let the broad base cool before removing it from the bed. A brim is optional if your printer needs help with adhesion.
The included STL and 3MF files are geometry only, in millimetres. STEP files are included too. Please slice for your own machine.