1 / 4
Easy Print Balsa Style Glider — image 1
1 / 4

Easy Print Balsa Style Glider

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Glider project made to print easy and quickly

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

Simple glider i came up with, It was inspired by the old school style Balsa gliders whole things target weight is between 26g-32g depending on print settings. Main wing i cut in half to print easier just stand the pieces up. Be sure to use 1 wall for the main wing and set infill to 2% cross hatch to keep the weight down. Whole thing is still slightly tail heavy but glides fine. I used PLA for mine as printing pla this thin makes it more springy and plyable rather than brittle. total print time is right at an hour and a half depending on your orientations. I wouldnt advise gluing the wings in as leaving them loose will help prevent breakage in crashes and landings.  

Still a work in progress but does function as it should, check back for mods or changes :D 

Tags