Easy Print Balsa Style Glider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glider project made to print easy and quickly
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple glider i came up with, It was inspired by the old school style Balsa gliders whole things target weight is between 26g-32g depending on print settings. Main wing i cut in half to print easier just stand the pieces up. Be sure to use 1 wall for the main wing and set infill to 2% cross hatch to keep the weight down. Whole thing is still slightly tail heavy but glides fine. I used PLA for mine as printing pla this thin makes it more springy and plyable rather than brittle. total print time is right at an hour and a half depending on your orientations. I wouldnt advise gluing the wings in as leaving them loose will help prevent breakage in crashes and landings.
Still a work in progress but does function as it should, check back for mods or changes :D