1 / 7
Epoxy stand/container with a lid (for tubes 25mm and 30mm) — image 1
1 / 7

Epoxy stand/container with a lid (for tubes 25mm and 30mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I created two version of this container. For 25mm wide tube and for 30mm wide. The 25mm version has shorter lid, but…

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
150
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I created two version of this container. For 25mm wide tube and for 30mm wide.

The 25mm version has shorter lid, but of course for the 25mm version the taller lid could be used. The lid has four latches that hold the lid closed on the stand.

In the stand there are two holes for mixing sticks. And slot for some mixing cup or epoxy manual.

Print Settings

Printer:

Geeetech prusa clone

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

25


Notes:

Supports are not needed.
There are custom supports provided within the model. Four in the lid (supporting the latches) and four in the stand that allow to print the slots for that latches from the lid.

These supports should be easy to remove with some small prying tool.

Category: Containers

Tags