1 / 1
Asrock Deskmeet B660 Front with Ventilation — image 1

Asrock Deskmeet B660 Front with Ventilation

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modded Deskmeet Front with Ventilation-Slits.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

A new Frontplate for the Deskmeet B660. The other Deskmeet Variants (X300, X600, B760) will probably work, too.

How it works depends on the coolerstyle of your GPU. My GPU has his coolings fins running lengthwise along with it. Therefore the hot air is is pushed out at the end of the GPU. If they are positioned perpendicular, the effect may be not as good.

Info:

Printed in PTEG. PLA will warp over time. Maybe HT-PLA will work. But I recommend PTEG, ASA or ABS.

You have to remove the small metal bracket in the left side of the case, around thefront-IO. Its just mounted with 3 or 4 small metal bridges.

The front panel has four pockets for magnetic tape. (WxH) 21mm x 2mm

It fits on mine B660 quite well, but depending if Asrock has moved the Front-Ports a bit, you should measure first. FreeCad File is here, too.

Tags