1 / 1
Curiosity Rover - (A modular, RC like crude model) — image 1

Curiosity Rover - (A modular, RC like crude model)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A RC like, kind of crude curiosity rover made entirely on fusion 360 with some wiring holes left for wires to flow.

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

RC - CURIOSITY ROVER

This is a RC-like Curiosity Rover model, It has quite some flaws and I admit it but I think it looks kind of good enough to be considered a RC for a first timer like me to do this kind of thing. The rover has 95 parts all put together to make it resemble the OG Curiosity Rover.

FEATURES

  • Wiring holes left out in sides of shell and in arms for motor fittings.

  • Top part of shell consist of a bolted hatch like part to cover and access its insides.

  • All of the motors used in Wheels and arms are made in mind for Doryoku Motors (L: 61mm, D:18mm).

  • The screws sticking out in the top most and arm's front most part are for gopros or some small cameras with side motor housing for mentioned motor above to act as a drill.

PARTS NAMING

How my parts are named and how can one differentiate.

WHEELS & MOTOR HOUSING

  1.  Left  (Left side motor holding arms) : <Part name> + L       [ L = indicating Left side ]

  2. Sub-arm (Small motor arms attached to the main arm):  <Part name> + L   [ L = indicating Left side ]

  3. Front (Front indicating non motorized sub arm): <Part name> + LSF (L = side, S = sub arm, F = Front)

PS: SAME NAMING SYSTEM GOES FOR RIGHT SIDE WITH 'R' INSTEAD OF 'L' INDICATING SIDE ( LEFT OR RIGHT)

CAMERA

  1.  Holder Rotations:  <Part name> (Holds all planetary gear, camera rotators and all)

  2.  Camera Lower arm:  lower arm of the camera holder 

ARM

Front tubings with motor housings to move the tubes, all together forming a arm

  1.  Main Joint (AF) : Planetary (Consists of 6 : 1 gearing planetary gear) that moves the first joint. Naming is simply <Part name>.

  2. Second Arm: <Part name> + JTM (JTM are given to parts joined to the main arm, JTM = Joined To Main arm).

  3.  Head Rotator: <Part name> + JTS (JTS are given to parts joined to the second arm, JTS = Joined To Second arm).

  4. Head:  2 parts with <Part name> + JTH (JTH = Joined to Head)

DIFFERENTIAL

Joins left and Right side of the arms housing motors and wheels.

BALL BEARING DIFF: Ball bearing of the top of rover shell's differential

Its part naming is simply <Part Name>

ROVER SHELL BACK

Consists of few parts to give the rover a personality and character and is simply <Part Name> nothing fancy

GENERATOR THING

  1. Lid Bolt: consists of 10 bolts holding the generator's lid altogether

  2. Two similar parts: There are many same parts mirriored to the other side and named as <Part Name> + L / R ( L / R: as in if the parts are in left side or right side)

PS: THE SIDES ARE DIFFERENTIED UPON LOOKING THE ROVER FROM ITS ARM FRONT.

PARTS ASSEMBLY INSTRUCTION

  1.  First Put in the joint in the Rover shell's Joint hole

 2. Put in the fork holder with its parts and screw down the fork parts

  1. Put that inside the joint and lock it down with thread locker

  2. It should look like this 

  3. now put in the Rotator gear adapter in the rotator and join with the arm's front bulgy part 

  4. put the Motor housing below the rotator and use clamp among them

  5.  Put the gear adapter in your wheel and put the motor in the motor housing joining the wheel

  6.  Repeat the motor housing thing for the wheel behind it and the Rotator, gear adapter and then motor housing for the wheel on the back most side, it should look like this

  7. Screw down the 'fork holder' part in the differential which should look like this 

  8. Repeat the same for other side and it should be like this

  9. NOW, Put in the differential ball bearing and THEN put in the screw on top of that ball bearing

  10. NOW for camera module, Put in the lower arm tube into the rover's shell's cylinder sticking out part

  11.  Put the planetary gear with threads on top of that lower arm tube 

  12. Now put in the gearbox lid on and then the camera holder in the thread and then put in the right mouth plate piece with gear and the left and motor gear with motor attached to it 

  13. Put in the planetary gear in front of the arm holder (6:1) ratio planetary gear with rectangular shaft 

  14. Put in the rotator main joint and then the rotator cuff with m11 x 1 bolts on the rotator cuffs

  15. Put in the motor housing in first and then the rotator joint pin for this 

  16.  PUT IN THE 61mm long motor and then put in the motor lip in front of it and then screw it down and then put the gear adapter in its shaft

     

  17. Put in the long 'L' Shaped arm in it 

  18.  Put in the gear then the lip and then the adapter and Voila, you have second arm 

  19.  do the same thing for the second arm and then put in the head arm which should look like this at the end 

  20. Lets go to the back of the rover, Put in the triangle things and then bolt them down and voila you should have this 

  21. Put in the heat exchanging plates with its support bracket rod in place of the notches made in the back fins

  22.  Since you're already there, here's a puzzle for the generator support brackets enjoy :))

  23.  Now put in the back plate and THEN VOILA, you're not there yet

  24. Put in the rover cover and then bolt it down when you need to close it 

There you have it, Enjoy!!

Tags